翼身融合布局低速验证机前缘缝翼设计

翼身融合布局是未来民机最有可能实现的非常规布局形式，其气动布局方案的验证通常采用缩比模型飞行试验的方式进行。以某翼身融合布局低速验证机为研究对象，以数值计算方法为基础，分析了其在飞行试验中存在的纵向和横向不稳定现象，提出了改善的方案——增加前缘缝翼。对此验证机进行前缘缝翼的气动布局设计、典型翼型的二维前缘缝翼设计和机翼三维前缘缝翼的气动设计，利用数值计算方法对设计结果进行纵向和横向分析。结果显示，所设计的前缘缝翼可以明显地增大验证机的失速迎角，改善其纵向力矩特性和横向特性。     

Assessment on critical technologies for conceptual design of blended-wing-body civil aircraft

Civil aviation faces great challenges because of its robust projected future growth and potential adverse environmental effects. The classical Tube-And-Wing(TAW) configuration following the Cayley's design principles has been optimized to the architecture's limit, which can hardly satisfy the further requirements on green aviation. By past decades' investigations the BlendedWing-Body(BWB) concept has emerged as a potential solution, which can simultaneously fulfill metrics of noise, emission and fuel burn. The purpose of the present work is to analyze the developments of critical technologies for BWB conceptual design from a historical perspective of technology progress. It was found that the high aerodynamic efficiency of BWB aircraft can be well scaled by the mean aerodynamic chord and wetted aspect ratio, and should be realized with the trade-offs among stability and control and low-speed performance. The structure concepts of non-cylinder pressurized cabin are of high risks on weight prediction and weight penalty. A static stability criterion is recommended and further clear and adequate criteria are required by the evaluations of flying and handling qualities. The difficulties of propulsion and airframe integration are analyzed. The energy to revenue work ratios of well-developed BWB configurations are compared,which are 31.5% and 40% better than that of TAW, using state-of-art engine technology and future engine technology, respectively. Finally, further study aspects are advocated.     

Comparison of satellite orbit ephemerides for use in GPS meteorology

This paper discusses GPS (Global Position System) meteorology. The research presented is based on a comparison of values of precipitable water vapour PWV, based on GPS measurements using final and predicted ephemerides of satellite orbits. We analysed recent year’s improvement in predicting ephemerides. We compared the data outputs from a radiosonde using GPS receiver measurements directly from the meteorological station from which the radiosondes were launched. The results indicate a high quality of the predicted ephemerides. This finding makes predicted ephemerides highly usable for near real-time estimations of PWV. To use PWV in meteorological forecast applications, this high speed of PWV values supply is necessary.     

翼身融合布局飞机机体-发动机气动干扰效应

翼身融合（BWB）布局飞机是一种相对较新的飞行器概念，具有商业运输飞机的潜在用途。研究表明，翼身融合布局客机可获得比常规布局客机更好的性能。但是，由于各方面限制，BWB飞机不宜使用传统的机翼安装或机身安装的发动机布局，发动机背部安装成为首选布局。然而，背部安装发动机容易产生激波、分离、进气畸变等空气动力干扰问题，发动机与机身一体化的气动设计已成为BWB飞机发展的关键技术。针对BWB布局飞机的机体和发动机之间的气动干扰进行了数值研究，结果表明，背部安装发动机对BWB布局飞机的全机气动特性和发动机本身的推力性能都会产生较为明显的影响。     

翼身融合布局客机总体参数分析与优化

在翼身融合布局客机总体设计阶段，为评估设计方案的总体性能，建立了翼身融合布局客机总体参数综合分析与优化平台，该平台以翼身融合布局客机的几何参数为输入，完成动力、几何、重量、气动、性能和经济性等模块分析，并以此为基础建立优化设计模型。为快速评估设计方案的性能及优化设计效果，动力分析模块采用了部件级分析模型，重量分析模块采用半经验估算方法，气动分析模块采用面元法结合工程估算方法，性能分析模块采用简化运动学方法，优化模型采用可并行计算的子集模拟优化算法。以某555座级翼身融合布局客机方案为例，应用开发的分析与优化平台，完成了总体参数分析，结果表明分析模型合理。在此方案的基础上，以客机的外形参数和发动机海平面最大推力为设计变量，分别建立了以最大起飞重量最小为目标的单目标优化，以及同时以直接使用成本和进场速度最小为目标的多目标优化，单目标优化结果最大起飞重量降低了约7.17%，多目标优化结果表明直接使用成本降低8.77%的同时进场速度会增加3.32%。     

Exploration and implementation of commonality valuation method in commercial aircraft family design

Commercial aircraft family design can reduce development costs, shorten development cycles, and expand the market coverage of aircraft. Commercial aircraft family development has become one of the most important features of modern aircraft design. This paper explores the effects of commonality on different aircraft models in a commercial aircraft family. The existing product commonality indexes are summarized and their limitations in the application to aircraft design are discussed. Then a new component commonality index is proposed based on the component decomposition structure. A model for calculating the aircraft program value is established,which considers development costs, manufacturing costs, sale price, operation costs and residual costs. The effects of aircraft commonality on time and economic costs of both development and manufacturing, and on sale price, are analyzed and quantified. The commonality evaluation strategy is obtained, which features comprehensive consideration of the aircraft program value and time costs. The break-even analysis of aircraft is proceeded on the basis of costs and price data. By using a real option method, the strategy considers the uncertainty of the aircraft program and the flexibility of the manufacturer. This strategy proves to be rational and applicable to aircraft design based on the calculation of three examples and the analysis of parameter sensitivity.     

小卫星非常规动力学分析与控制

针对小卫星研制中出现的一些非常规动力学问题进行研究,并提出解决办法。针对小卫星组件最大冲击谱量级超出常规冲击试验规范谱的分析与验证困难,通过研究提出了能够分析评估组件高量级冲击的方法。针对小卫星随机振动下强度设计方法还存在较大误差,分析了系统模态质量比与模态频率在一定频段的影响规律,认为忽略模态质量耦合会带来误差,提出了考虑模态质量耦合的准静态载荷计算方法。最后,针对小卫星整星开展了减振研究,分析了正弦和随机减振效果,对于对称安装减振系统,提出了减振系统的主频率计算公式。     

基于等效焦面的离轴遥感相机积分时间计算方法

目前在轨和在研的光学遥感卫星大都搭载的是离轴遥感相机,为了保证视轴正对星下点成像,相机需要整体俯仰一定角度补偿离轴角,这样就导致相机的焦平面无法平行于星下点水平面进行推扫成像,相机的积分时间计算不准确。针对以上问题,提出一种基于等效焦面的高精度积分时间计算方法,该方法构建与星下点水平面平行的等效焦面,通过建立严密的几何关系,求出真正电荷转移时间对应的像元尺寸,从而得到准确的积分时间。仿真试验表明,该方法可以将积分时间计算精度提高1.2%,为卫星在轨提高成像质量提供有效手段。     

遥感卫星全视场成像质量仿真方法研究

基于卫星工具包(STK)和MATLAB软件,提出了一种对卫星全视场成像进行物理建模分析的交互仿真方法。以一颗运行在650km高度的太阳同步轨道、具有侧摆能力的遥感卫星为例,对相机在运动中的全视场积分时间偏差和全视场偏流角修正残差进行了仿真分析。仿真结果表明,文章提出的方法能够较精确地对相机在轨全视场的成像质量进行分析,从而可用于在轨成像性能预估。该仿真方法还能以卫星工程数据作为输入,用于卫星星上算法验证、在轨误差分析补偿等方面,为保障卫星在轨成像质量发挥作用。     

捕风一号卫星总体设计与技术特点

捕风一号卫星是中国首次实现基于星载导航卫星反射信号测量(global navigation satellite system-reflection,GNSS-R)技术的气象卫星,采用新型L波段海面风场信息探测技术,在风场测量、海面飓风风速反演等方面为国家气象、防灾减灾等行业提供服务.从系统设计角度介绍了捕风一号卫星的总...